|Subject:||[TowerTalk] Guy Wire Lengths?|
|From:||"guy driver" <firstname.lastname@example.org>|
|Date:||Thu, 06 Nov 2003 18:40:25 +0000|
On the same idea I'm planning to put two sets of four guys on the tower.
One set half way up and the other set at the top. I think that using four
guys as 90 degree inverted vees with a common feed would make some neat
inverted vee's. There is ednogh room for the top set to be cut for 160.
(yes lots of room) The half way up set cut for 40 one way and 80 the other
way. But the extra lengths for the 80 past the insulator are in the area of
70 feet. How should this be cut up or am I just thinking of a idea that is
Guy WR7K email@example.com
Great deals on high-speed Internet access as low as $26.95. https://broadband.msn.com (Prices may vary by service area.)
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|