Towertalk
[Top] [All Lists]

Re: [TowerTalk] Guy Wire Lengths?

To: guydriver@msn.com, TowerTalk@contesting.com
Subject: Re: [TowerTalk] Guy Wire Lengths?
From: K7LXC@aol.com
Date: Thu, 6 Nov 2003 15:34:50 EST
List-post: <mailto:towertalk@contesting.com>
In a message dated 11/6/03 10:53:39 AM Pacific Standard Time, 
guydriver@msn.com writes:

> On the same idea I'm planning to put two sets of four guys on the tower.  
>  One set half way up and the other set at the top.  I think that using four 
>  guys as 90 degree inverted vees with a common feed would make some neat 
>  inverted vee's.  There is ednogh room for the top set to be cut for 160.  
>  (yes lots of room)  The half way up set cut for 40 one way and 80 the 
other 
>  way.  But the extra lengths for the 80 past the insulator are in the area 
of 
>  70 feet.  How should this be cut up or am I just thinking of a idea that 
is 
>  not workable???

    Question - What does the manufacturer say about using 4-way guying? What 
kind of tower is it? 

    In all cases, follow the LXC Prime Directive to "DO what the manufacturer 
says". 

    Slopers and inverted vees are not precise. You won't be able to see any 
difference between having antennas every 90 degrees or 120 degrees.

Cheers,
Steve     K7LXC
TOWER TECH --
Professional tower services for commercial and amateur
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>