This connection to the AC safety is there anyway unless you
are using cheater plugs on all your AC cords. The chassis'
of all your rigs and amps are connected to the third wire
ground of your AC service. Those chassis' are in turn
connected to your single point RF ground via the coax
cables going through the SPG panel. Running an extra
wire from the AC service ground to the RF SPG probably
won't change much since you will just be putting a wire
in parallel with multiple connections that are already there.
The only way to get around this is to bring the AC service
into the shack through the SPG.
73 de Mike, W4EF..................
----- Original Message -----
From: "Rob Atkinson, K5UJ" <email@example.com>
Sent: Friday, November 07, 2003 7:57 AM
Subject: [TowerTalk] P.S.: Surge supression
> <<<The [surge supressor] in the station should be grounded to the single
> point station ground
> panel, as well as to the home safety ground.>>>
> <<This sounds like a great way to turn your house wiring dc safety ground
> into a giant antenna by transferring rf from the shack rf ground to the
> wire on the house service lines.>>
> p.s. It also sounds like a way to set up a nice ground loop in your
> so RF can get into places you don't want it.
> Rob Atkinson
> Compare high-speed Internet plans, starting at $26.95.
> https://broadband.msn.com (Prices may vary by service area.)
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list