In a message dated 11/10/03 10:03:03 AM Pacific Standard Time, email@example.com
> I am putting up several 60 foot R25 towers and will be using the Rohn 25
> flat base. I would like to bolt the base plate to a concrete pad. What do
> you use? Threaded rod epoxyed into the pad? Expanding bolts?
Either one is FB. You'll need to rent either a roto-hammer or concrete
corer to get into the concrete. Then either technique is a slamdunk. Your local
hardware store will probably have the all-thread and the epoxy and not the
expansion bolts so the former would be easier.
There's not much stress in a small tower installation like this so you
don't need anything exotic; i.e. special epoxy.
TOWER TECH -
Professional tower services for commercial and amateur
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list