Towertalk
[Top] [All Lists]

[TowerTalk] Pre-Dug ground rod holes

To: towertalk@contesting.com
Subject: [TowerTalk] Pre-Dug ground rod holes
From: WarrenWolff@aol.com
Date: Fri, 26 Dec 2003 12:09:29 EST
List-post: <mailto:towertalk@contesting.com>
It seems to me that someone on this list made some negative comments about
drilling holes for ground rods.

I will be installing a gaggle of ground rods at my Lake Havasu City location.

I certainly wanted a machine to drill the holes in that rocky, river-bottom 
type soil(?).
The joke at the lake seems to be, "What Ground?"? Soooo, if that is not as 
effective,
yet a necessary installation route, can the effectiveness be restored by 
pouring
copper sulfate or equivalent in with the fill dirt?

Side note:? How did all those "code" get tuck in my earlier posting?? Is it 
because I
wrote in my word processor and pasted it?? If so, I think I will repost; I 
hate trying
to read round those things.? My apologies to all.  Steve just suggested that 
I should
use 10 point type and ARIAL font.  Maybe things will work now.

Thanks, Warren; W5KKW

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>