|To:||"Snowden, Douglas RICVAMC" <firstname.lastname@example.org>|
|Subject:||Re: [TowerTalk] Ways to mount and insulate a tall vertical ???|
|From:||Don Havlicek <email@example.com>|
|Date:||Fri, 06 Feb 2004 08:43:19 -0500|
Use solid fiberglass rod .. it works fine and won't degrade.
Have had my 80m vertical [60' Universal Tower] up since '89 .. and the fiberglass is perfect.
If you need some, let me know the inside diameter of the bottom section of your tower, as I have 6 or 8 rods of various diameters.
Snowden, Douglas RICVAMC wrote:
I have several sections of alumunum tower (Universal tower) that I plan on putting up as a 40/80 and maybe 160m vertical and plan on making it around 90 ft, including the aluminum tubing sticking out of the top. I would like to mount it insulated but an struggling deciding how to mount it insulated. I have heard that pressure treated lumber tends to have too much moisture to use. I have a couple of pieces of solid phenolic tubing one inch diameter. Any ideas? Something available from the hardware store? The legs are about 1 inch diameter.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||[TowerTalk] Ways to mount and insulate a tall vertical ???, Snowden, Douglas RICVAMC|
|Next by Date:||Re: [TowerTalk] CC&Rs again - definition, K7LXC|
|Previous by Thread:||[TowerTalk] Ways to mount and insulate a tall vertical ???, Snowden, Douglas RICVAMC|
|Next by Thread:||[TowerTalk] Ways to mount and insulate a tall vertical ??? useinsulators, Kevin Adam|
|Indexes:||[Date] [Thread] [Top] [All Lists]|