|To:||Mark Pride <firstname.lastname@example.org>, email@example.com|
|Subject:||Re: [TowerTalk] Yaesu vs. Tailtwister|
|From:||Pete Smith <firstname.lastname@example.org>|
|Date:||Mon, 16 Feb 2004 15:09:53 -0500|
At 01:05 PM 2/16/04 -0500, Mark Pride wrote:
In a nutshell, the aluminum casting to mount the mast to the rotor is probably the weak link in the 1000SDX.
FWIW, later production G-1000s include a sheet in the instruction manual telling how to sequence the tightening of the various bolts to avoid putting a bending stress on the cast aluminum clamps, which is what kills them. In a nutshell, you need to be sure the clamps are tight on the mast, then make sure they are concentric with the top of the rotator before you tighten the bolts that tie them to the rotator, and finally tighten the rotator mounting bolts on the rotator shelf.
A big plus for the Yaesus, in my opinion, is that there's no need for shims regardless of the diameter of the mast (within the range of the clamps, of course).
73, Pete N4ZR Check out the World HF Contest Station Database Updated 9 Jan 04 www.pvrc.org/wcsd/wcsdsearch.htm
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] Comparison between Tailtwister and Yaesu G-1000SDXrotors, Craig Miller|
|Next by Date:||Re: [TowerTalk] new tower for W0RTT, Alan C. Zack|
|Previous by Thread:||[TowerTalk] Yaesu vs. Tailtwister, Mark Pride|
|Next by Thread:||[TowerTalk] 4' rods, Rob Atkinson, K5UJ|
|Indexes:||[Date] [Thread] [Top] [All Lists]|