|Subject:||Re: [TowerTalk] loooong feedlines|
|From:||Jim Lux <email@example.com>|
|Date:||Mon, 03 May 2004 11:27:37 -0700|
At 10:11 AM 5/3/2004 -0700, Rick Karlquist wrote:
He used 4 wires to get a lower Zo, because he didn't want to deal with 450 ohms. Now that the 450 ohm problem has well established solutions, I can't see where 4 wires is worth the trouble.
I think that if you had a situation where you had to run the feedline very(!) close to something (that is, a distance comparable to the spacing of the wires), the 4 wire balanced line has a more "contained" field. The ultimate would be a braided cable with lots of conductors carefully balanced in position relative to all the other conductors, etc. I was looking into this when developing extremely low inductance, low loss, low electromagnetic force cables for pulsed discharges that needed to run inside a metal raceway.
Quadro-line has also been featured in one of the ARRL antenna compendiums.
As Rick says, though, I doubt that for any amateur radio kind of installation it would be worth it.
Also, it's hard enough to make a high performance balun. Trying to make a truly balanced transition for quadroline would be quite the challenge.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] loooong feedlines, Rick Karlquist|
|Next by Date:||Re: [TowerTalk] Cushcraft 2 el 40 design, GALE STEWARD|
|Previous by Thread:||Re: [TowerTalk] loooong feedlines, Rick Karlquist|
|Next by Thread:||[TowerTalk] F-12 Sigma 80, William F Beyer Jr.|
|Indexes:||[Date] [Thread] [Top] [All Lists]|