|Subject:||[TowerTalk] Brainstorming: A homebrew Steppir like beam....|
|From:||Rob Frohne <email@example.com>|
|Date:||Thu, 22 Apr 2004 12:38:17 -0700|
As Bill (W5WVO) recently put it, "The vast majority of you seem to think the SteppIR yagi is the greatest thing since the discovery of the ionosphere! " At this time, I haven't been able to find any information on anyone homebrewing anything similar, but there is a need, since the cost of the Steppir is high and there isn't a surplus market for them yet. I've been thinking about this problem off and on for the last several months, because my crank up tower would hold something the size of a Steppir, but not much more, and I've always wanted a remotely adjustable antenna.
I'm wondering if the group would humor me and brainstorm on this problem a little. One of my colleagues suggested I pose this problem to his Mechanical Design class, and so I wrote up a problem statement for them. I've put it on my web site at:
so you can look at the problem statement too.
I've had several ideas which I'll throw out below.
1) It would be nice to use readily available consumer or surplus parts in order to keep the cost down, and since this is about the only way to make homebrewing cost effective these days.
2) Hollow fiberglasss poles seem to be readily available at reasonable cost, from Steppir itself and from other sources like Antenna Mart.
3) I did some computer simulations and if pulleys are put on the end of the fiberglass tubes and wires are run down over those pulleys (perhaps with some small weights on the end of the elements), to make a kind of half quad the radiation resistance is still high enough in a yagi so efficient operation can be had. The gain is almost the same as a regular yagi. If this configuration is used, it seems more natural to have the pulleys go in a horizontal plane to match those on the end of the elements than the way Steppir did it.
4) You could also use threaded rod to change the size of the elements. In this case I can only imagine changing the size by a factor of 2 easily.
5) If you use BeCu strips like FluidMotion, there is an issue with machining the strips, because the dust is toxic. You can get the BeCu strips without any holes in them though, and that seems safe to me if you don't machine them. You could use a combination of strip and wire.
6) Keeping track of the length of the antenna element is a little problematic. Stepper motors can lose calibration. For a dipole, an SWR bridge could be used for final adjustments to the length. A yagi would require more accuracy. You might use an optical encoder on the spool, or even one of these cheap optical mice for computers. The chip they use has outputs for that which would make this easy, but I have no idea how they would respond in a high RF environment.
So what kind of ideas can you contribute to this need for a homebrew adjustable antenna? Has anyone else tried anything? What lessons have been learned?
Rob, KL7NA/W7 -- Rob Frohne, Ph.D., P.E. E.F. Cross School of Engineering Walla Walla College http://www.wwc.edu/~frohro/
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||[TowerTalk] Create RC5B-3 repair?, Scott R.|
|Next by Date:||[TowerTalk] Re: [Force 12 Talk]LMR 400 connectors was ideas needed, please, Jim Smith|
|Previous by Thread:||[TowerTalk] Create RC5B-3 repair?, Scott R.|
|Next by Thread:||[TowerTalk] Re: [Force 12 Talk]LMR 400 connectors was ideas needed, please, Jim Smith|
|Indexes:||[Date] [Thread] [Top] [All Lists]|