|Subject:||Re: [TowerTalk] Broken Element Tip|
|From:||Doug Renwick <firstname.lastname@example.org>|
|Date:||Wed, 12 May 2004 22:22:17 -0600|
Normally I place dampening rope in most of my element tips. I have had tips of KLM and CC elements fatigue and break off in the past. Against my better judgment I followed the Force-12 instructions and did not install any anti-vibration rope. What I am thinking of doing is to go to a heavier wall tubing (the original is 0.035" wall) of 0.049 or 0.058", switching from rivets to a gear clamp, and using a small diameter rope. That I know will work.
Tom Rauch wrote:
The tip of the reflector on a Force-12 6L 10M yagi
The same thing happened to my Force 12 ten meter yagi. The elements vibrated, and a tip broke off. I couldn't get rope in the elements because the rivets are in the way, so I stuck some pieces of thin rope in as far as I could and let it go at that.
-- Doug Renwick VA5DX PO Box 50, Clavet, Saskatchewan, Canada S0K 0Y0 VE5RA@sasktel.net First VE5 9BDXCC What profit it a ham if he gains all the awards yet forfeits his soul? I'll run the race and I will never be the same again.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||[TowerTalk] Customer satisfaction, ARNE GJERNING|
|Next by Date:||RE: [TowerTalk] Customer satisfaction, Al, N6TA|
|Previous by Thread:||RE: [TowerTalk] Broken Element Tip, Eric Scace K3NA|
|Next by Thread:||Re: [TowerTalk] Broken Element Tip, K7LXC|
|Indexes:||[Date] [Thread] [Top] [All Lists]|