Towertalk
[Top] [All Lists]

RE: [BULK] - [TowerTalk] Motorola Connectors

To: 'Michael Tope' <W4EF@dellroy.com>,TowerTalk <towertalk@contesting.com>
Subject: RE: [BULK] - [TowerTalk] Motorola Connectors
From: Steve Katz <stevek@jmr.com>
Date: Fri, 14 May 2004 09:28:56 -0700
List-post: <mailto:towertalk@contesting.com>
Those darn no-coders!  Oops, wrong place.

I've seen the cable extensions (Motorola female one end, right-angle male
installed on the other end) at my local car stereo/alarm installer's shop.
If you have such a shop near you, you might check there.

-WB2WIK/6






Sorry this a slightly little off topic (but not nearly as much as ISO9001
compliance). Anyone know where I can get right-angle motorola
connectors (e.g. the standard male car radio connector). Specifically
I need something that will change a long straight Motorola male
plug into a right-angle that makes a nice sharp turn (there isn't
much room between the firewall of my Ford pickup and the back
of the radio. A short jumper cable with a Motorola female jack on
one end and a Motorola right angle male on the other end would
do nicely. I recently got an antenna switch (see its sorta appropriate
for TowerTalk) that goes between my car radio and the factory
antenna , and the switch uses a long straight male plug which won't
clear the firewall.

Thanks,

Mike, W4EF............................



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>