Re: [TowerTalk] Motorola Connectors

[Tom Anderson <WW5L@gte.net>]

Michael:

I've bought 90 degree Motorola plugs and cables previously at my local 
Radio Shack.  Also if you have a Fry's Electronics superstore near you, 
they have a rather large preassembled cable and plug section.

Tom, WW5L



Michael Tope wrote:

> Sorry this a slightly little off topic (but not nearly as much as ISO9001
> compliance). Anyone know where I can get right-angle motorola
> connectors (e.g. the standard male car radio connector). Specifically
> I need something that will change a long straight Motorola male
> plug into a right-angle that makes a nice sharp turn (there isn't
> much room between the firewall of my Ford pickup and the back
> of the radio. A short jumper cable with a Motorola female jack on
> one end and a Motorola right angle male on the other end would
> do nicely. I recently got an antenna switch (see its sorta appropriate
> for TowerTalk) that goes between my car radio and the factory
> antenna , and the switch uses a long straight male plug which won't
> clear the firewall.
>
> Thanks,
>
> Mike, W4EF............................
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>  



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk