|To:||Michael Tope <W4EF@dellroy.com>|
|Subject:||Re: [TowerTalk] Motorola Connectors|
|From:||Tom Anderson <WW5L@gte.net>|
|Date:||Fri, 14 May 2004 17:11:26 -0500|
I've bought 90 degree Motorola plugs and cables previously at my local Radio Shack. Also if you have a Fry's Electronics superstore near you, they have a rather large preassembled cable and plug section.
Michael Tope wrote:
Sorry this a slightly little off topic (but not nearly as much as ISO9001 compliance). Anyone know where I can get right-angle motorola connectors (e.g. the standard male car radio connector). Specifically I need something that will change a long straight Motorola male plug into a right-angle that makes a nice sharp turn (there isn't much room between the firewall of my Ford pickup and the back of the radio. A short jumper cable with a Motorola female jack on one end and a Motorola right angle male on the other end would do nicely. I recently got an antenna switch (see its sorta appropriate for TowerTalk) that goes between my car radio and the factory antenna , and the switch uses a long straight male plug which won't clear the firewall.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [BULK] - Re: [TowerTalk] Amidon customer satisfaction, on4kj|
|Next by Date:||[TowerTalk] GR 1606-A, Jim Brown|
|Previous by Thread:||[TowerTalk] Motorola Connectors, Michael Tope|
|Next by Thread:||Re: [TowerTalk] Motorola Connectors, Marlon K. Schafer|
|Indexes:||[Date] [Thread] [Top] [All Lists]|