|To:||towertalk reflector <firstname.lastname@example.org>|
|Subject:||Re: [TowerTalk] Class 2 and Class 7 Poles|
|From:||Alan AB2OS <email@example.com>|
|Date:||Mon, 17 May 2004 14:28:29 -0400|
How practical is it to use a 50' (or 60', if available)
utility/telephone pole as a support for something like a 3-el. SteppIR?
And how would the installed cost compare with a typical steel tower of
the same height?|
On 05/17/04 02:10 pm Doug Faunt N6TQS +1-510-655-8604 put fingers to keyboard and launched the following message into cyberspace:
According to -The American Elecricians' Handbook-, the standards are from ANSI, and the 10 classes are classified by the circumference at the top and at a point 6 feet from the butt.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] Class 2 and Class 7 Poles, Doug Faunt N6TQS +1-510-655-8604|
|Next by Date:||Re: [TowerTalk] wire for radials, K4SB|
|Previous by Thread:||Re: [TowerTalk] Class 2 and Class 7 Poles, Doug Faunt N6TQS +1-510-655-8604|
|Next by Thread:||Re: [TowerTalk] Class 2 and Class 7 Poles, RICHARD BOYD|
|Indexes:||[Date] [Thread] [Top] [All Lists]|