If you only pick up 2 or 3 sections in each lift,You can use the cross
bracing. I believe the top of each section has straight piece on all sides.You
can loop it with straps or use shackles.I used a flat top section w/thrust
bearing.It has 3 holes on the top plate just right for shackles.The operator
should be able to help you.
73 Joe K4XZ
> From: "isp" <email@example.com>
> Date: 2004/05/21 Fri AM 10:07:30 EDT
> To: "towertalk" <firstname.lastname@example.org>
> Subject: [TowerTalk] raising a tower
> I have built towers using gin poles and it is going ok yet a bit slow. I
> have to build another tower and have learned that people build them on the
> ground and use a crane or similar to raise them in the air. So I called a
> crain company that does tower raises for a local professional tower company
> to see what it would cost to do so. The cost was very acceptable and wanted
> to do it that way. They said that they need to be given the "pick" point
> for the tower so they knew where to hook on without damaging the tower. So
> I called the manufactuer (NELLO) to ask. They won't give pick points for
> thier towers and say it is the tower installers responsibility. How do I
> find these "pick" points? It is a 125' nello 45 N tower.
> thanks Terry
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
INSPECTOR CITY OF BOYNTON BEACH
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list