IT's all combined in one container. You fill the mold by inverting the
shot container, thereby placing the starting power on top.
How long have you had the shots you used? Maybe they were wet or
otherwise unsuitable. I had had some trouble with a few of the shots on my
tower install a few years ago, but they all went after I played with the
spark igniter's flint and set it differently.
Maybe you could call Joel at RF Connections in G'burg. He might have
Gene Smar AD3F
----- Original Message -----
From: "Howard Klein" <firstname.lastname@example.org>
Sent: Monday, May 24, 2004 4:55 PM
Subject: [TowerTalk] Cadweld help
> Is the starting powder for the Cadweld combined with the welding metal or
> it separate? I ran the gamut of a spark igniter to a propane torch. The
> powder glowed red but no exothermic reaction. What am I doing wrong?
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list