-Slide the mast way down inside the tower (with the rotor moved out of the
way), clamp it that way using the thrust bearing setscrews, and install the
"top" antenna; then, slide it up a few feet and install the "second from
top" antenna, and so forth until you're done.
-Or, you can use a mast with climbing spikes, a good belt and a lot of guts.
-Or you can install the tower with the antennas already assembled onto it,
if you have the right raising fixtures, or a lot of help, or a crane...
The first option is the one most people use.
"Success is the ability to go from failure to failure with no loss of
enthusiasm." -Winston Churchill
> -----Original Message-----
> From: George Yazz [SMTP:email@example.com]
> Sent: Wednesday, May 26, 2004 3:55 PM
> To: TowerTalk@contesting.com
> Subject: [BULK] - [TowerTalk] antenna installation
> how does one install a antenna on the very top of a mast, i can see how
> you stand on the tower and may be reach up a couple of feet. but if you
> are puting up 2 antennas
> how and the heack can you get to the top of a 15 foot (what ever size)
> mast and bolt every thing together.
> i am going to put up a rohn 25 tower and 2 antennas,
> P. George Yazzolino
> 14801 NE 20th Circle
> Vancouver, Wa. 98684
> KC7HKP Grid CN-85
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list