Try and ask steel dealer for tube/pipe made of 4130 material
Andy - va3pl
----- Original Message -----
To: <firstname.lastname@example.org>; <email@example.com>
Sent: Wednesday, May 26, 2004 10:26 PM
Subject: Re: [TowerTalk] Mast material
> In a message dated 5/26/04 7:14:29 PM Pacific Daylight Time, firstname.lastname@example.org
> > The chrome-moly tube that is sold specifically for masts is horrendously
> > expensive,
> Yes, it's an investment-quality piece of steel but if it's what you
> you gotta have it. My own experience is that most guys that buy chromoly
> really don't need it. I've bought some steel alloy tubing that's 74% as
> (good for about 90% of the applications out there) as 115kpsi chromoly and
> costs half as much.
> > and one of the hams around here decided to use well-casing,
> > which was far cheaper. Was that a false ecomomy?
> Isn't well casing just another pipe to carry liquids? They're heavy
> not strong basically. What is the yield strength of the well casing and
> sort of load is it carrying? Maybe he just didn't need much of a mast.
> > What do I really need
> > to support a 3-el. SteppIR (the other guy had a lot more antenna than
> > that on his well casing) less than 10ft. above the top of the tower?
> A 3L SteppIR is a pretty small antenna but without knowing your county
> windspeed rating it'd be hard to say. Your rating is available on <A
> HREF="http://www.championradio.com">www.championradio.com</A> under Tech
Notes if you
> don't know.
> Steve K7LXC
> Champion Radio Products
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list