|Subject:||[TowerTalk] CDE HAM II Rotor . . . another question|
|Date:||Thu, 27 May 2004 20:51:12 -0400|
Several of you were kind enough to help me a few weeks with a question
about a CDE HAM II rotor. Now I have another issue and thought I'd try
my luck again.|
I bought this CDE Ham II rotor in 1976, used it for about five years and removed it from service and stored it.
The problem I'm having is with the direction indication on the control unit. If the rotor starts at full south and I turn it in the SENWS direction, it seems to work ok. But if it's full south and I turn it in the SWNES direction, the indicator meter on the control unit stops at about 270 degrees even though the rotor is still turning. When the rotor gets to about 360 degrees, the meter jumps to the correct indication and works ok through the rest of the travel to south. So the indicator meter works OK in one direction but not the other.
I thought there was a problem with the potentiometer assembly and so bought a new one from the Hy-Gain people at Dayton. I replaced it and learned that the new potentiometer assembly exhibits essentially the same behavior as the old one :(
With the top casting removed the potentiometer assembly is readily accessible and easily turned by hand. I see the same 270-to-360 jump when turning it by hand.
Where do I go from here? Two defective potentiometer assemblies? It seems like pretty long odds that a potentiometer assembly from 1981 would exhibit the same anomalous behavior as a new one I bought this month.
Any advice out there?
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [BULK] - [TowerTalk] antenna installation, Mike Rhodes|
|Next by Date:||[TowerTalk] Raising the Mast w/Antennas, AA6DX|
|Previous by Thread:||RE: [BULK] - Re: [TowerTalk] Looking for tower shipping company recommendations, Steve Katz|
|Next by Thread:||Re: [TowerTalk] CDE HAM II Rotor . . . another question, Bill Aycock|
|Indexes:||[Date] [Thread] [Top] [All Lists]|