In my opinion, cable that old should be replaced. The fact that you are
questioning replacement indicates that you have some doubt in its overall
service capability. If it is difficult to service your rotor, I definitely
would replace it. If you have a crankup/ tilt over tower where it is
relatively easy to service your rotor, then, maybe its worth the chance.
For what it is worth.
----- Original Message -----
From: "Lou Laderman" <email@example.com>
Sent: Saturday, May 29, 2004 10:12 AM
Subject: [TowerTalk] Using older rotor cable?
> I'm refitting my rotor, and have rotor cable that's 18 years old but
> seems to work just fine. The "outside" run looks to be in good shape (a
> bit "dirty gray" in color, otherwise it appears sound), and I'm
> contemplating just reusing it to avoid the expense of new cable and
> running a replacement line (about 150'). Coax should be replaced over
> time due to UV and weather issues, but what about rotor cable? Any
> thoughts if I should I replace the cable or can safely reuse it?
> Lou, KB0CJ
> Louis N. Laderman
> Email: firstname.lastname@example.org
> Office Email: email@example.com
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list