|Subject:||Re: [TowerTalk] Identifying CDR rotator|
|From:||Chuck Sudds <email@example.com>|
|Date:||Sun, 30 May 2004 19:27:14 -0500|
At 09:35 PM 5/30/04 +0000, firstname.lastname@example.org wrote:|
As Per Norm's Rotor Service FAQ below: http://www.rotorservice.com/faqs.htm#What%20is%20the
3. What is the difference in the Ham series of rotors?
The Ham-M rotor was released in 1957, and there were 5 series with the last rotor being produced in 1973. The Ham-M rotor would have the series number, 1 - 5, followed by 3 digits which indicated the week and year of manufacture. For example, a rotor with the series number 5 322 would be a Ham-M, series 5, manufactured in the twenty-second week (the '22' in '322') of the year 1973 (the '3' in '322').
Hope this helps.
got a CDR rotator and dont know what model it is as it came w/o the control box. In the bottom side of the rotator there is a separate 4 then separated from the 4 is 335. Does this mean it is a Ham4 and the seriel # iss 335? Also am looking for a control box for it. Thanks for reading.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||[TowerTalk] antenna party live!, David Robbins K1TTT|
|Next by Date:||RE: [TowerTalk] Utility GND / Tower GND interconnection question, Jim Brown|
|Previous by Thread:||[TowerTalk] Identifying CDR rotator, epetek1|
|Next by Thread:||[TowerTalk] antenna party live!, David Robbins K1TTT|
|Indexes:||[Date] [Thread] [Top] [All Lists]|