[Top] [All Lists]

[TowerTalk] positioning Yagi with remote camera.

To: <>
Subject: [TowerTalk] positioning Yagi with remote camera.
From: "Peter" <>
Date: Sat, 5 Jun 2004 10:01:48 +0200
List-post: <>
Hi there,

i'm suffering a while from exact position readout from my controlbox Create 
Probably the potentiometer suffers from moisture inside the rotor.
That's why a few days i have that readings and severall days later other 
mostly i made a small paper to convert the readings to the real ones.

I don't wanna  remove my rotor,but looking for a good solution to get
a good exact positioning readout.
I was thinking on a remote camera (with infrared) 2.4GHZ.

Does anybody has some practical expierences  or solutions to point out
the camera with a yagi,so i can see easy the directions for example in
a 10 or 15 degrees step.

So any suggestions,practical advises or webpages very welcome.

Kind regards,73's Peter ON7BJ.


See:  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>