i'm suffering a while from exact position readout from my controlbox Create
Probably the potentiometer suffers from moisture inside the rotor.
That's why a few days i have that readings and severall days later other
mostly i made a small paper to convert the readings to the real ones.
I don't wanna remove my rotor,but looking for a good solution to get
a good exact positioning readout.
I was thinking on a remote camera (with infrared) 2.4GHZ.
Does anybody has some practical expierences or solutions to point out
the camera with a yagi,so i can see easy the directions for example in
a 10 or 15 degrees step.
So any suggestions,practical advises or webpages very welcome.
Kind regards,73's Peter ON7BJ.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list