The real issue is probably:
Is the MA550 strong enough for the Yagi when the wind blows?
I just bought a 2 element SteppIR for my
MA-550. I also have a 4 element SteppIR
at another QTH on a lattice tower turned by an AlfaSpid.
I wouldn't want to put the 4 element on the MA-550 unless I was
going to crank it down in high winds.
I used to have a KT34 on the MA550 and a HAM-M
turned it with no problem. I didn't leave it up
in high winds. I remember that the antenna would
slip on the mast in high winds, so the HAM-M never
really got much of a workout. The rotating base
structure is specifically designed for the HAM-M
through HAM-IV rotators, as you can probably figure
out if you look at it.
I have 20 year old UBC calcs for the MA-550 and it certainly
isn't rated for much antenna area at 70 MPH.
Kim Bottles said:
> I just picked up a used MA550 with rotating base. Is the Ham IV strong
> enough to turn this thing? I will be putting my 4 element SteppIR (10
> Square feet WL, 80 pounds) on it.
> What rotator is the "best" solution that will fit the rotating base
> Kim Bottles - K7IM
> Ps. Does anyone have a manual for this MA550 that they would be willing
> to copy for me? (I have the drawing from US Tower's website, but if
> there is any other information that came with it originally, I would
> like to see what it has to say. Thanks again.)
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list