|Subject:||Re: [TowerTalk] CAT 5 as Rotator cable|
|From:||Pete Smith <firstname.lastname@example.org>|
|Date:||Fri, 18 Jun 2004 00:57:50 -0400|
At 10:23 PM 6/17/2004, K8RI wrote:
My own thoughts are Cat-5 is a tad fragile. As I recall it's solid instead of stranded with the wires loose inside what amounts to a thin walled plastic tube.
I think the real show-stopper is the small gauge of the wires. I'm using CAT3 successfully to run a remote antenna switch, but the current requirement is only 30 ma. The motor in a G-800 draws a lot more than that, so the voltage drop over any distance would be prohibitive. The copper wire table in any ARRL Handbook will give you the resistance per foot for various sizes of wire.
73, Pete N4ZR
The World HF Contest Station Database
was updated on June 5, 2004
2728 contest stations at
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||[TowerTalk] Tower loading, Zoran Brlecic|
|Next by Date:||Re: [TowerTalk] CAT 5 as Rotator cable, VE6JY Don Moman|
|Previous by Thread:||Re: [TowerTalk] CAT 5 as Rotator cable, Tower (K8RI)|
|Next by Thread:||RE: [TowerTalk] CAT 5 as Rotator cable, Michael Hatzakis K3MH|
|Indexes:||[Date] [Thread] [Top] [All Lists]|