I use a hacksaw with two blades installed.
John
----- Original Message -----
From: "Steve London" <n2ic@arrl.net>
To: <towertalk@contesting.com>
Sent: Monday, July 19, 2004 18:50
Subject: [TowerTalk] Cutting slots in aluminum tubing ?
Anyone have any tips for cutting slots in aluminum tubing without having a
full machine shop at your disposal ?
Thanks,
Steve, N2IC
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|