Be careful not to compare apples to oranges here.
My 15 yr old tilt raising fixture for the UST 89' tower uses three
for mechanical advantage. My 3 yr old LM-470 tilt raising fixture uses
only one pulley for mechanical advantage.
Furthermore, the winch for the UST was the k2550 (~40:1 gearing)
versus the LM-470's k1550 (15:1 gearing).
Winching the UST tower is easy but winching the LM-470 was very
difficult until I replaced the k1550 with a k2550.
Later I modified the LM-470 tilt raising fixture and cabling to use
three pulleys also and it cranks easily. I probably expend as much
energy moving my arm and hand as I do raising the tower?
I have not used the pivot-at-the-top-of-the-tower method of tilting
the tower (which has no pulley mechanical advantage, relying only
on the winch and tower balance) because of workmanship issues.
I would be interested in how well that works and why would anyone
want to motorize it?
----- Original Message -----
From: "Julio Peralta" <firstname.lastname@example.org>
> I have an 89' UST tilt over crank-up. I use a 1/2 DeWalt drill motor
> bought from Home Depot for less than $100. The drill has an approx.
> motor and when coupled to the shaft that the hand crank goes on will
> up the 89' UST very nicely.
> Julio, W4HY
> ----- Original Message -----
> From: "Joe Giacobello" <email@example.com>
> > Has anyone ever motorized the tilt-over winch on an LM-470 or
> > tower? If so, I'd be interested in knowing how you did it. I know
> > friend of mine once fabricated his own tilt tower that was perfectly
> > balanced around the pivot points so that he could tilt it by just
> > manually pulling up on the base and pushing it into a horizontal
> > position. Maybe counter weighting the LM-470 so it was more
> > might allow a motorized winch to do the same thing easily. Just
> > what you mechanical gurus have done on this front.
> > 73, Joe
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list