|To:||"Michael Tope" <W4EF@dellroy.com>, <email@example.com>,"Tom Rauch" <firstname.lastname@example.org>,"TowerTalk" <email@example.com>|
|Subject:||YagiStress Web Site was Re: [TowerTalk] Rohn Torque Bar confusion|
|From:||Pete Smith <firstname.lastname@example.org>|
|Date:||Wed, 04 Aug 2004 07:49:46 -0400|
At 03:15 AM 8/4/2004, Michael Tope wrote:
Offhand I don't know the value of the modulus for a typical EHS guy wire, but just imagine for a minute how hard you would have to pull on a guy wire that is already tensioned to 600 lbs in order to get it to yield an additional 0.13 inches. Also consider that the difference between .008% and .006% is 33%, or in other words adding the 12" torque arms to the Rohn 55 increased the resistance to torsional rotation by a factor of 1/3. That's nothing to sneeze at.
I believe the answer is "not much" -- it's not a question of modulus, but of sag in a catenary.
I'm working from memory here, but K7NV, the author of YagiStress, used to have an article on his web site comparing the characteristics of various guying materials, and another dealing with finite element analysis of a guyed tower model. Both would be good reading in the context of this discussion, but neither the old freeyellow site nor the new URL Kurt announced in January (www.k7nv.com) seem to be working. Does anyone have a more current URL???
73, Pete N4ZR
The World HF Contest Station Database
was updated on August 2, 2004
2753 contest stations at
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] Rohn Torque Bar confusion, Michael Tope|
|Next by Date:||[TowerTalk] Torque Bars...another way to look at it., Cqtestk4xs|
|Previous by Thread:||Re: [TowerTalk] Rohn Torque Bar confusion, Michael Tope|
|Next by Thread:||Re: [TowerTalk] Rohn Torque Bar confusion, Tom Rauch|
|Indexes:||[Date] [Thread] [Top] [All Lists]|