Towertalk
[Top] [All Lists]

Re: [TowerTalk] EZ-Way crank-up

To: <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] EZ-Way crank-up
From: "Julio Peralta" <jperalta@tampabay.rr.com>
Date: Thu, 5 Aug 2004 07:41:54 -0400
List-post: <mailto:towertalk@contesting.com>
Depending on what they want you may have to have an engineer look at it.

The tower it self is rated for 12 SQ-FT of antenna in 50MPH wind. Since it
doesn't have an internal rotor shelf and upper mast support surface to help
support the rotor you will be limited to what an externally mounted rotor
can handle. A Ham IV is rated for 7.5 SQ-FT with lower mast adaptor.

Julio, W4HY

----- Original Message ----- 
From: "Steve Hanlon" <asciibaron@comcast.net>
To: <TowerTalk@contesting.com>
Sent: Wednesday, August 04, 2004 10:46 PM
Subject: [TowerTalk] EZ-Way crank-up


> i am considering picking up an EZ-Way crankup (RBS-40 i believe).  it
> comes with new cable and the wonder post.  that is all i know about the
> tower as there is not much out there on the web.  an owner of one
> informed me that with the wonder post one need only dig a 5 foot hole
> and drop it in - no concrete.  how do i get this past the building
> permit folks?
>
> -steve hanlon
> KB3KAQ
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>