Thanks to you AK6I and K8RI for the explanation of TPI.
I measured BOTH bolts and it appears that they are BOTH
Regarding the size of the bolts, the diameter of BOTH
bolts appears to be almost halfway between 5/16" and 3/8".
There are NO ridges or lines on either bolt.
Any further help in identifying these bolts would be greatly
Thanks! & 73
> Hi BOB:
> Thread pitch is the number of "threads per inch", usually stated as
> My R25G bolts all came with "fine" threads or SAE threads as some call
> The size of your bolt head, 9/16", makes me think these are 5/16" or even
> bolts. R25G uses 2 sizes per leg - so, I would have to guess that R45/55
> series would too...The 5/16" size is the only one common to both, but
> compare those threads. Most Home Depot/Lowes stores have a display with
> sizes mounted so you can match what you have... Fine thread, like 24
> galv bolts is rare to find in common home owner type stores...they usually
> only carry course threads. IF they are grade 5, there will be 3 little
> the head of the bolt" lines or ridges...kind of like a 3-blade airplane
> This is the universal sign for high strength steel bolts. IF you don't see
> those, don't use them.
> Regards, 73
> Mel Frost
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list