[Top] [All Lists]

Re: [TowerTalk] Yaesu G-1000SDX

To: "Manuel Larsson\"Teknik forumet\"" <>,<>
Subject: Re: [TowerTalk] Yaesu G-1000SDX
From: "Paul Playford" <>
Date: Tue, 17 Aug 2004 17:52:45 -0000
List-post: <>
Does the control box growl at you when you are turning the rotator?  If so
check the rubber band that drives the dial indicator.  I used a drive belt
for a VCR to replace it.

de Paul, W8AEF

----- Original Message ----- 
From: "Manuel Larsson"Teknik forumet"" <>
To: <>
Sent: Tuesday, August 17, 2004 1:51 PM
Subject: [TowerTalk] Yaesu G-1000SDX


I am trying to trouble shoot a Yaesu G-1000SDX rotator.

 The rotor box gets no reading on the direction indicator. Can anyone tell
me which pins I should check to see if the variable resistor is working or

Any common fail modes for this type of problem on this rotator?

I test it for about 1 week ago and the its work 100%

Manuel SM6TMR


See:  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>