Does the control box growl at you when you are turning the rotator? If so
check the rubber band that drives the dial indicator. I used a drive belt
for a VCR to replace it.
de Paul, W8AEF
----- Original Message -----
From: "Manuel Larsson"Teknik forumet"" <firstname.lastname@example.org>
Sent: Tuesday, August 17, 2004 1:51 PM
Subject: [TowerTalk] Yaesu G-1000SDX
I am trying to trouble shoot a Yaesu G-1000SDX rotator.
The rotor box gets no reading on the direction indicator. Can anyone tell
me which pins I should check to see if the variable resistor is working or
Any common fail modes for this type of problem on this rotator?
I test it for about 1 week ago and the its work 100%
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list