I think the drilling method is okay. It may not be good in arid climates,
but a few good rain showers will re-pack the dirt around the rod. In dry
earth it's always good to use electrolyte to enhance conductivity.
[mailto:firstname.lastname@example.org] On Behalf Of Dudley Chapman
Sent: Thursday, August 26, 2004 2:39 PM
Subject: [TowerTalk] Exothermic/Cadwelds one shots etc...
To the List,
As for the water-driving technique shown on the website offered a few
days ago, I have a question. This technique is very clever, but I have read
that it's important to drive the rods into hard-packed soil so there is a
lot of contact between the rods and the soil. Pre-drilling a hole for the
rods and then backfilling is explicitly not-recommended, unless you are
doping the soil with electrolytic stuff. I would think that using the
water-drilling method would produce the same problem as a pre-drilled and
backfilled hole. Does anyone have comments on this? If I run into trouble
driving the rods, I would like to use the water method, but not if it makes
a poorly grounded rod.
Dudley - WA1X
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list