I have a remote operated US Tower and have never felt comfortable cranking
the tower either up or down without watching it like a hawk. There are just
to many things that can go wrong and have gone wrong while the tower was
moving.
Julio, W4HY
----- Original Message -----
From: "Craig Sande" <craig.sande@sbcglobal.net>
To: <towertalk@contesting.com>
Sent: Sunday, September 19, 2004 10:54 PM
Subject: [TowerTalk] Inverted V On Crank-Up Tower
I am installing a 70 foot crank-up tower soon and would like to install an
inverted v antenna for 80/40 M. The tower will have a remotely controlled
motor to extend and nest it from the shack.
In such an arrangement, is their anyway to have a tensioned reel to take in
the antenna excess as the tower is lowered, or does one simply allow the
inverted v to drape down? I'm concerned about the wires snagging on
something and putting stress on the tower as it is remotely extended to
operating height.
Any suggestions?
Craig, AE7I
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|