|To:||"TowerTalk List" <email@example.com>|
|Subject:||Re: [TowerTalk] RE: Installing Tower Bolts|
|Date:||Fri, 1 Oct 2004 12:28:21 -0500|
As a licensed mason contractor I was frequently asked to help DIY hams pour bases.|
wire tying rebar to the bolts is a must, both around the perimeter and with diagonals across the center.
In addition, I used bolts above and below the bolt template, well tightened.
Those tricks took a few minutes to prepare, but saved many minutes during and after the pour.
----- Original Message ----- From: "Bill Turini" <firstname.lastname@example.org>
Sent: Friday, October 01, 2004 12:18 PM
Subject: [TowerTalk] RE: Installing Tower Bolts
There was a comment made regarding welding tower bolts together at the base to ease installation. I ran into problems with my recent installation and have a plan for my next tower base. :-)
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||[TowerTalk] RE: Installing Tower Bolts, Bill Turini|
|Next by Date:||Re: [TowerTalk] RE: Installing Tower Bolts, Terry Dunlap|
|Previous by Thread:||[TowerTalk] RE: Installing Tower Bolts, Bill Turini|
|Next by Thread:||Re: [TowerTalk] RE: Installing Tower Bolts, Terry Dunlap|
|Indexes:||[Date] [Thread] [Top] [All Lists]|