|To:||FireBrick <email@example.com>,"TowerTalk List" <firstname.lastname@example.org>|
|Subject:||Re: [TowerTalk] RE: Installing Tower Bolts|
|From:||Terry Dunlap <email@example.com>|
|Date:||Fri, 01 Oct 2004 12:40:07 -0700|
This brings up a question that I've had for a while. It's always
recommended that the bolts get|
tied to the rebar in a new base installation but it seems to be accepted practice to retrofit an
existing base for a different tower by using epoxy anchors. These anchors aren't tied to the
rebar in any way and would be the same as NOT tying bolts in a new pour. Isn't this a
contradiction or at least an inconsistency?
73 de Terry KK6T
At 10:28 AM 10/1/2004, FireBrick wrote:
As a licensed mason contractor I was frequently asked to help DIY hams pour bases.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] RE: Installing Tower Bolts, FireBrick|
|Next by Date:||Re: [TowerTalk] RE: Installing Tower Bolts, FireBrick|
|Previous by Thread:||Re: [TowerTalk] RE: Installing Tower Bolts, FireBrick|
|Next by Thread:||Re: [TowerTalk] RE: Installing Tower Bolts, FireBrick|
|Indexes:||[Date] [Thread] [Top] [All Lists]|