[Top] [All Lists]

Re: [TowerTalk] replacing relay

To: "Towertalk" <>
Subject: Re: [TowerTalk] replacing relay
From: "Tom Rauch" <>
Reply-to: Tom Rauch <>
Date: Wed, 20 Oct 2004 23:43:44 -0400
List-post: <>
By far the best way to replace open frame relays in the
RCS-4 is to simply break the relay base apart, and then
unsolder the lugs one at a time. You can break the relays
apart by carefully using SHARP side-cutters to crack or
split the base of the relay at the terminals.

If the board is the newer board with DIP relays, the same
technique works but desoldering is generally OK also.

73 Tom


See:  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>