4" steels pipes? How thick were the walls and have you had any wind to see
how they held up?
----- Original Message -----
From: "Jon Zaimes AA1K" <email@example.com>
To: <firstname.lastname@example.org>; <email@example.com>
Sent: Thursday, October 21, 2004 12:04 PM
Subject: [TowerTalk] re: Elevated guy posts
> There is lots of info in the Towertalk archives on elevated guy posts.
> I started using these at my Bear, Del., QTH around 1981. Those were 4-inch
steel pipes filled with concrete, with about 5 feet in a block of concrete
in the ground and 5 above.
> Now I use mostly I beam elevated guy posts. Generally 10 feet long, with 5
or 6 feet in a hole that is 12" diameter and filled with concrete. There's a
photo of two of them on my Web site, www.aa1k.us, under "Towers". I'll try
to get a couple more up in the next few days.
> 73/Jon AA1K
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list