[Top] [All Lists]

[TowerTalk] TX-455 tiltover fixture question

To: <>
Subject: [TowerTalk] TX-455 tiltover fixture question
From: "Dan Kovatch" <>
Date: Fri, 22 Oct 2004 05:21:57 -0400
List-post: <>
I have a TX-455 installed with the tiltover fixture. After raising into 
position I have noticed that the tiltover fixture  is tilting sideways about 2 
inches.( I know that the fixture is supposed to tilt AWAY from the tower.) The 
arms on both sides of the fixture are the same length so this doesn't account 
for it. This tilt is noticable if you stand opposite the fixture and look 
through the tower. I have e-mailed US tower with the question and have gotten 
no response so far. 

Is this a design feature so the leg will not land on the back pad flange? Or do 
I need to 'persuade' it to be straight up and down? If you have or have owned 
one  of these your input will be appreciated.

See:  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] TX-455 tiltover fixture question, Dan Kovatch <=