----- Original Message -----
From: "Tom Rauch" <firstname.lastname@example.org>
To: "David Hachadorian" <K6LL@adelphia.net>; "Towertalk
Sent: Thursday, October 28, 2004 10:46 AM
Subject: Re: [TowerTalk] Guy Anchor Corrosion Question
> Were your guy lines insulated? Were they metal and
> directly between the tower and ground rods?
There were two guys on each anchor. The top guy was
Phillystran, with just a 4' piece of EHS at the bottom.
The bottom guy, attached to the tower at about the 25
foot level, was EHS all the way, with no insulators.
The tower is grounded at the base, but there is no
separate ground rod at each anchor.
Dave Hachadorian, K6LL
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list