Maybe "Penetrox" or a similar product ? Look at the DX Engineering website
(or elsewhere) for details.
----- Original Message -----
From: "WA4MWM" <email@example.com>
To: "TowerTalk" <firstname.lastname@example.org>
Sent: Thursday, November 04, 2004 7:34 PM
Subject: [TowerTalk] Protectant for beam connections
> I am finalizing the assembly of some Force 12 beams. Where the balun
> attaches to the driven elements and where element jumpers are installed
> (bolts through the elements attached to balun leads with ring connectors -
> mostly #10 and 1/4" size), they recommend "spraying" the contacts to
> them from moisture, corrosion, etc.
> What is recommended to use for this? I need to make this as permanent as
> possible since this area will be inaccessible after installation without a
> crane and personnel bucket.
> Winston-Salem, NC
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list