I'd advise against using fibreglass - mice will nest in it or simply go through
it to find better place to live or to find food (your house). Stick to a metal
wool that doesn't rust.
73, George VE3YV / K8HI (reply to ve3yv@rac.ca)
> Message: 2
> Date: Mon, 01 Nov 2004 17:20:17 -0800
> From: Jim Lux <jimlux@earthlink.net>
> Subject: Re: [TowerTalk] Conduit ends?
> To: "Paul Ash" <bluesdude@cfl.rr.com>, <towertalk@contesting.com>
> Message-ID: <5.2.0.9.2.20041101171658.00a7a4f0@mail.earthlink.net>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
>
> At 08:11 PM 11/1/2004 -0500, Paul Ash wrote:
> >Hello All,
> >
> >I have been considering running my coax, antenna
> >selector control cable and rotor control cable through a 3"-4"
> >inch conduit. I would like to get some opinions on the best
> >way to handle the ends that are projecting out of the ground.
> >I did read a former thread that talked about two 90 deg bends
> >(sounds good for water/rain.) what about bugs/rodents/varmints etc...
> >Anyone have a good idea how to seal the ends that would still provide
> >passage of the cables and could be removed with a minimum of effort
> >whenever it comes time to replace or add to the cables?
>
>
> steel wool?
> (or stainless steel, or bronze, both of which won't rust)
>
> fiberglass insulation is another possibility.
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|