|Subject:||[TowerTalk] Roof mounting 5BTV|
|From:||"R. Kevin Stover" <email@example.com>|
|Date:||Sun, 07 Nov 2004 15:45:24 -0600|
I'm planning on roof mounting a 5BTV vertical in the next week.
I'll be mounting it on an Radio Shack 3 ft. tripod and plan on 4 radials per band.
The manual tells me that I should use 2 feed line chokes, one at the antenna and one at the radio. I'm planning on using a pair of Radio Works T-4 1:1 current "line isolators" instead of the chokes.
One section of the manual has me a little confused though. The instructions say to RF isolate the antenna from the mounting mast if the mast is an appreciable fraction of a 1/4 wavelength in frequency. The tripod and mast will be 5ft tall. I've also noticed that there is no ground connection on this antenna. Is this correct?
This setup will be a temporary lash up to get me through the winter when I hope to be able to get a new tower and beam installed at the new QTH. If the vertical works well it will become my backup on the higher bands.
Thanks for the input.
R. Kevin Stover, ACØH
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] Re: 80 Meter Hybrid Triangle Loop, Tom Rauch|
|Next by Date:||[TowerTalk] Thanks for the valuable contributions to the group, Al, N6TA|
|Previous by Thread:||[TowerTalk] geo888 bounced mail, K7LXC|
|Next by Thread:||Re: [TowerTalk] Roof mounting 5BTV, Tom Rauch|
|Indexes:||[Date] [Thread] [Top] [All Lists]|