Sounds pretty good, wonder if you should share your 'experience' with
the folks at the National Fire Protection Association, National
Electrical Code, ANSI, IEEE, and all those kind of places? There must
be some reason they approve what they do, and it is usually due to a
large amount of testing and evaluation.
Sure, copper pipe might work fine, so long as your insurance agent is
willing to pay out for your lightning damage even though your
installation doesn't meet the recognized codes. I dunno, it just isn't
worth it to me.
Daron J. Wilson, RCDD ) )
Telecom Manager ( (
LH Morris Electric, Inc. ) )
(541) 265-8067 office _|****| mmm!
(541) 265-7652 fax ( | | coffee!
(541) 270-5886 cellular \| |
> -----Original Message-----
> From: email@example.com [mailto:towertalk-
> firstname.lastname@example.org] On Behalf Of SavageBR@aol.com
> Sent: Tuesday, November 09, 2004 1:16 PM
> To: email@example.com; firstname.lastname@example.org
> Subject: Re: [TowerTalk] Ground rod sticker shock
> Don't full with rods. Use 1/2 or 3/4 inch CU pipe. it is cheap and
> better. I have been using it for 40 yrs.
> Bruce AA4Z
> See: http://www.mscomputer.com for "Self Supporting Towers",
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041
> questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list