[Top] [All Lists]

RE: [TowerTalk] US Tower Raising Fixture Question

To: 'Pat Chiles' <>,
Subject: RE: [TowerTalk] US Tower Raising Fixture Question
From: Ve6wz_Steve <>
Date: Fri, 12 Nov 2004 07:02:04 -0700
List-post: <>

Try cranking up a HDX-589 with the raising fixture...very hard indeed.
My some young kid $20.

I'm interested to know of other ideas too...I needed to lower mine this
summer to PM replace the cables.

Steve ve6wz.
> Cranking this tower (HDX 555) from horizontal to vertical was 
> unexpectedly very hard.  The only additional weight was a 140 
> lb mast snuggled inside the tower.  I could only do about 10 
> complete rotations and then had to take a break and I am a 
> fairly big boy and in fair shape.
> My question is what have others done to lessen this burden?  
> Is there a better winch or rigging scheme to gain mechanical 
> advantage?  My tower has two side-by-side pulleys on the 
> tower, but only one is used.  The raising fixture only has 
> one pulley.  The cable goes over the pulley at the raising 
> fixture, around one of the pulleys at the tower, and back to 
> the raising fixture where it is terminated on a bolt.  We 
> have it rigged per the instructions.
> Pat, K8PC 



See:  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>