Polyphasers in my case, are mounted on a bulkhead plate where all coax and
rotor wires pass thru the concrete wall of my basement.
Tom Hybiske, K3GM
----- Original Message -----
From: "Pat Chiles" <email@example.com>
Sent: Tuesday, November 16, 2004 7:48 PM
Subject: [TowerTalk] ICE Suppressor Placement?
I have purchased 4 ICE devices for my new tower installation. I was under
the impression that they should be mounted just before the shack on a
bulkhead close to the ground rod. The purpose, I thought, was to keep the
lghtening out of the shack. The ICE instructions say that the best place to
mount them is inside near the equipment and single point ground bulkhead,
after the amp, and preferably before the tuner. Is this how others are
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list