|To:||K7LXC@aol.com, firstname.lastname@example.org, email@example.com|
|Subject:||why crankup..Re: [TowerTalk] Looking for some tower advice|
|From:||Jim Lux <firstname.lastname@example.org>|
|Date:||Fri, 19 Nov 2004 16:40:25 -0800|
At 02:36 PM 11/19/2004 -0500, K7LXC@aol.com wrote:|
IMO most people who buy crank-ups (or tiltovers) so that they can work on them are spending money that they don't need to. There's no reason why a properly installed system should need any work for years. Plus you've increased the mechanical complexity significantly along with the price with one.
An important reason that people buy extending towers (pneumatic,crankup, what have you) is because some locations make it theoretically(!) easier to get it permitted, because you get a special use permit that says you only extend it when operating, and leave it down (and inconspicuous) when not operating.
Steve's comment about buying one so that you can work on it, though, is appropriate. It makes little difference whether you climb 10 feet or 70 from a safety standpoint. On the other hand, my grandfather's crank up, in my feeble recollection, put the antenna about 2-3 feet above roof level in the down position, so you didn't climb the tower to work on the antenna, you climbed up on the roof.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] Ham IV bearing balls, Mark - AA6DX|
|Next by Date:||Re: [TowerTalk] Welding Aluminum Tower, doc|
|Previous by Thread:||Re: [TowerTalk] Looking for some tower advice, K7LXC|
|Next by Thread:||RE: why crankup..Re: [TowerTalk] Looking for some tower advice, Joe Subich, K4IK|
|Indexes:||[Date] [Thread] [Top] [All Lists]|