Be careful about welding aluminum. A qualified welder can no doubt do the
weld, but consider this:
Unless the weld is a weld repair (re-welding an existing weld to eliminate
cracks or broken welds), welding in a virgin area will weaken the aluminum
substantially! As an example, the original yield rating of 6061-T6 in
tension is about 35,000 psi, (~21,000 after applying safety factors); after
welding, the rating is about 11,000 psi (~7,000 after safety factor). As you
see, the strength of welded aluminum is only about 1/3 that of the original
Use good judgement about how the repair will affect the structure.
From: doc [mailto:firstname.lastname@example.org]
Sent: Friday, November 19, 2004 11:24 AM
To: Tower Talk List
Subject: [TowerTalk] Welding Aluminum Tower
I am considering the purchase of a 50 foot aluminum tower that needs two or
three welds repaired.
I did a little Google search and found some pretty wide-ranging options, the
durafix one sounds the easiest to handle -- if reliable.
Experienced counsel here?
Thanks! & 73, doc kd4e
West Central Florida 100% Linux. Suse 9.2 Drake, Icom, Hallicrafters,
Heathkit, TenTec, Yaesu Radio Life: http://www.gospelcom.net/twr/
Linux-Incompatible hardware is defective!
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list