|Subject:||Re: [TowerTalk] Need Hustler G7-144 2-Meter Ant. Dimensions|
|From:||W0UN -- John Brosnahan <firstname.lastname@example.org>|
|Date:||Sat, 20 Nov 2004 16:35:45 -0600|
Here are some options for you.
1 Call New-Tronics and ask for a manual : Service 940-325-1386 Sales 877-994-9499
2) Go to the web page on this antenna and look at the overall dimension. (15 ft 4 in) That will give you a decent clue--then tweak for SWR http://www.new-tronics.com/main/html/base_model_g7-144.html
3) Go to the eham Reviews section and ask some of the guys who have posted recent reviews. They have an antenna and probably a manual. http://www.eham.net/reviews/detail/2837
4) Check out the Boat Anchor site -- NO it is not there, but that is a good place to start. http://bama.sbc.edu/
There are other web sites with manuals--but you can probably find them as easily as I can.
t 03:50 PM 11/20/2004, email@example.com wrote:
_______________________________________________I just picked up a Hustler G7-144 2-Meter antenna at a local garage sale. It is in very good condition, but it's missing the very top piece of aluminum tubing. I'd guess that it's supposed to be a piece of 3/8" aluminum tubing. There's a piece of fiberglass about 4 feet from the bottom, and above that, there's about a 1/2" tube with a small "hose clamp", which looks like its expecting a piece of 3/8" tubing to be inserted and then tightened up. I'm also guessing that this is the only piece that's missing, besides a little plastic cap that might go on the top to keep water out.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||RE: [TowerTalk] Welding Aluminum Tower, Bob Kellow, W5LT|
|Next by Date:||[TowerTalk] Ring Rotor motor disassembly?, Jon Zaimes AA1K|
|Previous by Thread:||[TowerTalk] Need Hustler G7-144 2-Meter Ant. Dimensions, firstname.lastname@example.org|
|Next by Thread:||RE: [TowerTalk] Need Hustler G7-144 2-Meter Ant. Dimensions, Dale Martin|
|Indexes:||[Date] [Thread] [Top] [All Lists]|