[Top] [All Lists]

[TowerTalk] modeling 4 squares w/comtek hybrid

Subject: [TowerTalk] modeling 4 squares w/comtek hybrid
From: Jim Lux <>
Date: Mon, 22 Nov 2004 15:51:49 -0800
List-post: <>
In the Comtek hybrid, are the feedlines to the elements connected in parallel at the hybrid, or in series? I'd guess parallel: notional 40-50 ohm feedpoint Z through 75 ohm 1/4 wave transformer gives about 100ohms, so 2 in parallel gives 50 ohms. However, one observation of the reality is far better than an hour or two of dialectic.


See: for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] modeling 4 squares w/comtek hybrid, Jim Lux <=